 |
|
|
|
Wall,
Floor and Ceiling Panels
Wall and Ceiling Panels Cooler panels are constructed of expanded 4" Polystyrene insulation. Freezer panels are constructed of rigid 4" Urethane insulation. Panels are designed with tongue and groove type edges to insure vapor tight joints. Insulation is covered with an interior and exterior metal pan. Insulation and metal pan are bonded together with epoxy and pressed for 24 hours. Panels are fastened together with steel cam-lock fasteners mounted in a rigid, plastic block, spaced no more than 48" apart. Panel sizes up to 48" wide and 20 long. Floor Panels Like the ceiling and wall panels, floor panels are constructed with a full 4" insulation. Insulation is protected with 3/8" exterior plywood at the top facing which gives a compressive strength of approximately 600 lbs. per square foot. Top and bottom of floor panels are metal covered, with top side formed at the edges as an irregular Z to avoid water and dust penetration. For the same purpose, an aluminum "T" is placed at the joint of the floor panels. |
